我们的代表将在 24 小时内与您联系。.
1.It is suitable for stamping the empty slot of aluminum door and window hardware installation, pneumatic control and stable work.
2.Four-station pneumatic stamping is adopted, with smooth stamping and high production efficiency.
3.It is controlled by pneumatic pedal valve and works stably.
4.Four working positions, which can complete the processing of water trough, flat fan handle hole, corner cutting and driver end punching (Ф 10, Ф 6).
| 模型 | CLY-16 |
|---|---|
| 工作气压 | 0.6-0.8MPa |
| 压力机标称压力 | 16KN |
| Number of working positions | 4 |
| 打孔行程 | 30 毫米 |
| 模具尺寸 | 340*240*500mm |
| 总尺寸 | 520*450*1200mm |
| 重量 | About 120kg |
1.用于铝合金门窗的安装和铝型材的冲孔加工。2.冲孔工艺，通过改变......。.
1.适用于单一模式和组合模式的冲孔加工。2.模具安装和更换量大、方便、快捷、高速......。.
1.适用于各系列铝门窗型材的单模和四工位组合模的冲裁。 2.The......
1.适用于铝合金门窗角码型材的切割，可实现连续切割......。.
1.适用于铝合金门窗角码型材的切割，可实现连续切割......。.
适用于切割铝合金门窗的角码型材，可实现 6 米长的连续切割......。.
请填写下表，我们将尽快与您联系。.
